A Complete Hydraulic Steering System for Small Croft to Big Crafts. It Starts From 30 Kgm.
To 1600 Kgm. For Commercial &Pleasure Craft. All Hydraulic Steering Components Manufactured for Almost 40 Years Without Compromise on Material Specifications or Operating Pressures.
We Can Supply Complete Unit With the Following: –
1. Steering Wheel.
2. Hydraulic Pump.
3. Electro Hydraulic Pump With Joystick.
4. Non-return Valve.
5. Copper Tubes or Hoses.
6. Connection Kits.
Technical details:
Pressure MTC30: 3923 kPa (40 kg/cm2)
(569 lbs/sq.inch). Pressure MTC52-175: 5492 kPa (56 kg/cm2)
(797 lbs/ sq.inch). Connections: G 1/4 female pipe thread.
Total rudder angle: 70° (2 x 35°).
In the case of a dual steering position, in order to change over from one position to another, the installation of non-return valves is required.
The ideal solution will then be: the installation of two steering pumps, with integrated non-return valve. Another solution could be: steering pumps without integrated non-return valve, plus installation of a separate nonreturn valve block. In the case of single station control, installation of a steering pump without integrated non-return valve will suffice in most cases. This set-ups will provide feed back from the rudder to the wheel. Both steering pump models HTP and HTPR may be fitted with the shaft at any angle between horizontal and vertical. Pump types HTPR are provided with a non-return valve, a pressure relief valve, as well as a “continuous air bleeding system”.
 |
 |
 |
|
 |
Wheel turns: 3.4 | ||
| Max. Torque: 294 Nm (30 kgm) (216 ft.lbs) Wheel turns port – sbd: 3.4 Tubing: nylon hose Ø 6 x Ø 8 mm MT 30 | |||
 |
Wheel turns: 5.3 | Wheel turns: 3.5 | |
| Max. Torque: 510 Nm (52 kgm) (376 ft.lbs) Torque at 35° and 56 kg/cm2: 412 Nm (42 kgm) (304 ft.lbs) Wheel turns port – sbd 5.3 Tubing: nylon hose Ø 6 x Ø 10 mm copper Ø 8 x Ø 10 mm MT 52 | Max. Torque: 510 Nm (52 kgm) (376 ft.lbs) Torque at 35° and 56 kg/cm2: 412 Nm (42 kgm) (304 ft.lbs) Wheel turns port – sbd 5.3 Tubing: nylon hose Ø 6 x Ø 10 mm or Ø 8 x Ø 12 mm copper Ø 8 x Ø 10 mm | ||
 |
Wheel turns: 7.5 | Wheel turns: 4.9 | Wheel turns: 3.5 |
| Max. Torque: 706 Nm (72 kgm) (521 ft.lbs) Torque at 35° and 56 kg/cm2: 589 Nm 60 kgm) (434 ft.lbs) Wheel turns port – sbd 7.5 Tubing: nylon hose Ø 6 x Ø 10 mm copper Ø 8 x Ø 10 mm MT 72 | Max. Torque: 706 Nm (72 kgm) (521 ft.lbs) Torque at 35° and 56 kg/cm2: 589 Nm 60 kgm) (434 ft.lbs) Wheel turns port – sbd 4.9 Tubing: nylon hose Ø 6 x Ø 1 0 mm or Ø 8 x Ø 12 mm copper Ø 8 x Ø 10 mm | Max. Torque: 706 Nm (72 kgm) (521 ft.lbs) Torque at 35° and 56 kg/cm2: 589 Nm 60 kgm) (434 ft.lbs) Wheel turns port – sbd 3.5 Tubing: nylon hose Ø 6 x Ø 1 0 mm or Ø 8 x Ø 12 mm copper Ø 8 x Ø 10 mm | |
 |
Wheel turns: 8.5 | Wheel turns: 6.1 | |
| Max. Torque: 1226 Nm (125 kgm) (904 ft.lbs) Torque at 35° and 56 kg/cm2: 981 Nm 100 kgm) (723 ft.lbs) Wheel turns port – sbd 8.5 Tubing: nylon hose Ø 6 x Ø 10 mm or Ø 8 x Ø 12 mm copper Ø 8 x Ø 10 mm MT 125 | Max. Torque: 1226 Nm (125 kgm) (904 ft.lbs) Torque at 35° and 56 kg/cm2: 981 Nm 100 kgm) (723 ft.lbs) Wheel turns port – sbd 6.1 Tubing: nylon hose Ø 6 x Ø 10 mm or Ø 8 x Ø 12 mm copper Ø 8 x Ø 10 mm | ||
 |
Wheel turns: 8.5 | ||
| Max. Torque: 1717 Nm (175 kgm) (1266 ft.lbs) Torque at 35° and 56 kg/cm2: 1373 Nm 140 kgm) (1013 ft.lbs) Wheel turns port – sbd 8.5 Tubing: nylon hose Ø 6 x Ø 10 mm or Ø 8 x Ø 12 mm copper Ø 8 x Ø 10 mm MT 175 |
 |
 |
 |
|
OBC 125
Maximum rudder
torque: 643 Nm
Volume: 108,3 cm³
Maximum output
90 kW (125 hp)
Maximum speed: 85 km/h (45 knots) |
OBC125 the piston rod moves inside the cylinder | ||
| Wheels turns port – starboard: 5,5 | Wheels turns port – starboard: 3,6 | ||
OBC 225
Maximum rudder torque:
1026 Nm
Volume: 172,6 cm³
Maximum output:
165 kW (225 hp)
Maximum speed: 85 km/h (45 knots) |
OBC225 the piston rod moves inside the cylinder | ||
| Wheels turns port – starboard: 8,8 | Wheels turns port – starboard: 5,8 | Wheels turns port – starboard: 4,1 | |
OBC150
Maximum rudder torque:
643 Nm
Volume: 108,3 cm³
Maximum output:
110 kW (150 hp)
Maximum speed: 85 km/h (45 knots) |
OBC150 the cylinder moves over the piston rod | ||
| Wheels turns port – starboard: 5,5 | Wheels turns port – starboard: 3,6 | ||
OBC275
Maximum rudder torque:
788 Nm
Volume: 132,6 cm³
Maximum output:
220 kW (300 hp)
Maximum speed: 110 km/h (60 knots) |
OBC275 the cylinder moves over the piston rod | ||
| Wheels turns port – starboard: 6,8 | Wheels turns port – starboard: 4,4 | Wheels turns port – starboard: 3,2 | |
MTC100Z
Maximum rudder torque: 989 Nm
Volume: 132 cm3 /163,3 cm3
Maximum output:
220 kW (300 hp)
Maximum speed: 95 km/h (50 knots) |
MTC100Z for Z-drives and outboard engines | ||
| Wheels turns port – starboard: 8,3 | Wheels turns port – starboard: 5,4 | Wheels turns port – starboard: 3,9 | |
- Available for single and dual station control.
- Cylinder and pump can be supplied separately.
- Please see selection table for determination of steering wheel revolutions.
- Axial plunger pumps with 7 plungers• Stainless steel steering wheel shaft, extra strong for large steering wheels
- These steering systems are supplied complete with fittings for hydraulic tubes
- The cylinders are provided with bleed nipples which accept a quick-release coupling for rapid bleeding.
- The piston rod is made of stainless steel
- The cylinder is provided with a base plate with universal joint and a swivelling rod end, so that alignment mistakes can be absorbed.
| Technical data cylinders | ||||||
MT230 | MT345 | MT455 | MT600 | MT900 | MT1200 | |
Max torque at 35° rudder angle | 2207 Nm (225 kgm) | 3335 Nm (340 kgm) | 4415 Nm (450 kgm) | 5886 Nm (600 kgm) | 8829 Nm (900 kgm) | 11772 Nm (1200 kgm) |
Cylinder stroke | 200 mm | 300 mm | 400 mm | 200 mm | 300 mm | 400 mm |
Max. pressure | 6178 kPa (63 kg/cm2 )(896 lbs/in2) | |||||
Cylinder Volume | 500 cm3 | 750 cm3 | 1000 cm3 | 1319cm3 | 1978 cm3 | 2638 cm3 |
Total rudder angle | 70° | |||||
Length of tiller arm | 175 mm | 260 mm | 350 mm | 175 mm | 260 mm | 350 mm |
Weight of cylinder | 13.8 kg | 15.9 kg | 18 kg | 35.1 kg | 38.8 kg | 42.5 kg |
Dimen. of tubes | Ø 18 x 15 mm | |||||
Connections | All connections are provided with G1/2 female pipe thread (fpt) | |||||
| Technical Data Pump Units | MTP 89 | MTP 151 | MTP 191 |
Capacity of pump unit | 89 cm3/rev | 151 cm3/rev | 191 cm3/rev |
Number of pistons | 7 | 7 | 7 |
Maximum Pressure | 63 kg/cm2 (6178 kPa) (896 lbs/sq. inch) | ||
Dimensions of tubes | Ø 18 x 15 mm | ||
Connections | G1/2 female pipe thread (fpt) | ||
Weight of pump unit | 9.1 kg | 23 kg | 23 kg |
| Min. Steering wheel diameter | 65 cm | 110 cm | 135 cm |
| In inches | ||||||||||||||||
Cylinder | A | B | C | D | E | F | G | H | I | K | L | M | N | O | P | R |
MT 230 | 733 | 607 | 127 | 200 | 175 | 112 | 140 | 143 | 36 | 11 | 72 | 100 | 31 | 25 | 28 | 55 |
MT 345 | 933 | 757 | 177 | 300 | 260 | 112 | 140 | 215 | 36 | 11 | 72 | 100 | 31 | 25 | 28 | 55 |
MT 455 | 1133 | 907 | 227 | 400 | 350 | 112 | 140 | 286 | 36 | 11 | 72 | 100 | 31 | 25 | 28 | 55 |
MT 600 | 735 | 695 | 40 | 200 | 175 | 162 | 198 | 143 | 74 | 18.5 | 148 | 180 | 25 | 35 | 40 | 102 |
MT 900 | 935 | 845 | 90 | 300 | 260 | 162 | 198 | 215 | 74 | 18.5 | 148 | 180 | 25 | 35 | 40 | 102 |
MT 1200 | 1135 | 995 | 140 | 400 | 350 | 162 | 198 | 286 | 74 | 18.5 | 148 | 180 | 25 | 35 | 40 | 102 |